|
Post by mortgages143 on Nov 4, 2011 6:29:04 GMT -5
For the actual carpet installation, begin in one corner of the room. You will need to trim the carpet next to the wall and tuck in the ends using a plastic paddle. The carpet will firmly secure itself into the tack strip. Be sure that you don't hammer the carpet into the tack strip, even though this may seem logical at first. If you do this, the hammering will cause the tacks to bend and not hold the carpeting in securely.
|
|
|
Post by kanimozhi143 on Nov 4, 2011 6:39:37 GMT -5
prepare the room for installation. Install a tack strip around the entire perimeter of the room, but be sure to maintain a 3/8" space between the strip and the baseboard. You can choose to place a piece of plywood next to the baseboard and wall, which will protect them as you hammer down the tack strip.
|
|