|
|
Post by edinburgh007 on Dec 6, 2011 5:47:37 GMT -5
Visit www.forecast3D.com for more information regarding why this company is one of the top 3d printing companies in the world. As one of the premier 3d printer companies, Forecast3D continues to provide its customers with products and services that meet and exceed expectations. Contact Forecast3D today. |
|
|
|
Post by bond07 on Dec 6, 2011 5:55:10 GMT -5
When it comes to finding the best 3D printer, it is essential that you find a service that is willing to work with you to meet your needs. If you need a rapid 3D printing job that is not too detailed, they should be able to get that prototype to you overnight. If it is more important that the model or prototype is exquisitely detailed, then the job might take longer since more layers of resin will have to be applied.
|
|
|
|
Post by webspider on Dec 7, 2011 8:19:18 GMT -5
hello friends, What wasn't shown, is that someone has taken the scanned model and defined some boundaries between the different (inferred) subcomponents, and then made sure there was a little gap between. Any errors of assumption will be concealed, and so long as the exterior surface is correct and the mechanism operates the right way, we may feel they don't matter for a stunt of this kind. thanks Bankruptcy Law Attorney California |
|
|
|
Post by adamson on Jan 6, 2012 12:02:36 GMT -5
hello friends,
I agree with moving the head not the work piece. I was building a tall thin walled piece that had an infill. The infill was only about 2mm and that made for very rapid back and forth movements. About every 20mm in height the part would start to resonate to the frequency of the platform motion and cause misalignments and imperfections. I am going to a fixed table and movable head(s) in the next iteration.
thnaks
|
|
